中國管道解決方案提供商:www.tourochina.com

Pipe Coupling

Size: 1/2"-48"
Wall thickness: SCH5S-SCHXXS
Material: Special Alloy, Super Duplex Stainless Steel, Stainless Steel, Carbon Steel, Titanium
Standards: ASME B16.9, ASME B16.28, MSS SP43, MSS SP75

  • 產品介紹
  • Material

The pipe coupling is a short tube used to connect two pipes. Because of its convenient use, pipe coupling is widely used in civil construction, industry, agriculture and other fields.

Acero has 3 warehouses in Wenzhou, Wuxi and Hebei. As one of the piping solution providers, Acero has been committed to providing one-stop solutions for projects in the fields of oil and gas, water, renewable energy and infrastructure. With years’ consistent dedication and innovation, our reliable, cost-effective and environment-friendly solutions have won clients’ wide recognition.
China Pipe Couping manufacturer Acero supplies Pipe Couplings, Tube Couplings, Coupling Pipe Fittings in kinds of materials such as carbon steel, stainless steel, alloy steel, titanium, etc.

Pipe Coupling Dimensions

Socket Weld Coupling Dimensions

pipe coupling dimensions - Pipe Coupling

Threaded Coupling Dimensions

half coupling dimensions - Pipe Coupling

NOMINAL PIPE SIZE END TO END MINIMUM LENGTH OF  THREAD OUTSIDE DIAMETER
Inch. Full Coupling Half Coupling # 3000 # 6000
A A/2 B C D D
1/8 32 A/2 6.7 6.4 16 22
1/4 35 A/2 10.2 8.1 19 25
3/8 38 A/2 10.4 9.1 22 32
1/2 48 A/2 13.6 10.9 28 38
3/4 51 A/2 13.9 12.7 35 44
1 60 A/2 17.3 14.7 44 57
1 1/4 67 A/2 18 17 57 64
1 1/2 79 A/2 18.4 17.8 64 76
2 86 A/2 19.2 19 76 92
2 1/2 92 A/2 28.9 23.6 92 108
3 108 A/2 30.5 25.9 108 127
4 121 A/2 33 27.7 140 159
All Dimensions are in mm

Pipe Fittings Dimensions Tolerance as per ASME B16.9

Fitting Dimension Tolerance 2 - Pipe Coupling

NOMINAL PIPE SIZE ALL FITTINGS ALL FITTINGS ALL FITTINGS ELBOWS AND TEES 180 DEG RETURN BENDS 180 DEG RETURN BENDS 180 DEG RETURN BENDS REDUCERS CAPS
NPS O.D. at Bevel (1), (2) I.D. at End 
(1), (3), (4)
Wall Thickness (3) Centre-to-End Dimension A,B,C,M Centre-to-Centre O Back-to-Face K Alignment of Ends U Overall Length H Overall Length E
½ to 2½ 0.06 
-0.03
0.03 Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.12
3 to 3 ½ 0.06 0.06 Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.12
4 0.06 0.06 Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.12
5 to 8 0.09
-0.06
0.06 Not less than 87.5% of nominal thickness 0.06 0.25 0.25 0.03 0.06 0.25
10 to 18 0.16
-0.12
0.12 Not less than 87.5% of nominal thickness 0.09 0.38 0.25 0.06 0.09 0.25
20 to 24 0.25
-0.19
0.19 Not less than 87.5% of nominal thickness 0.09 0.38 0.25 0.06 0.09 0.25
26 to 30 0.25
-0.19
0.19 Not less than 87.5% of nominal thickness 0.12 0.19 0.38
32 to 48 0.25
-0.19
0.19 Not less than 87.5% of nominal thickness 0.19 0.19 0.38
NOMINAL PIPE SIZE NPS ANGULARITY TOLERANCES ANGULARITY TOLERANCES ALL DIMENSIONS ARE GIVEN IN INCHES. TOLERANCES ARE EQUAL PLUS AND MINUS EXCEPT AS NOTED.
Off Angle Q Off Plane P (1) Out-of-round is the sum of absolute values of plus and minus tolerance. 
(2) This tolerance may not apply in localized areas of formed fittings where increased wall thickness is required to meet design requirements of ASME B16.9.
(3) The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser.(4) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside diameter, which equals the difference between the nominal outside diameter and twice the nominal wall thickness.
½ to 4 0.03 0.06
5 to 8 0.06 0.12
10 to 12 0.09 0.19
14 to 16 0.09 0.25
18 to 24 0.12 0.38
26 to 30 0.19 0.38
32 to 42 0.19 0.50
44 to 48 0.18 0.75

Summary
pipe coupling - Pipe Coupling
Aggregate Rating
5 based on 1 votes
Brand Name
Acero
Product Name
Pipe Coupling
Price
USD 1-10000
Product Availability
Pre-Order Only

Material

Special Alloys

  • HASTELLOY® X
  • MONEL® R-405
  • MONEL® K-500
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 825
  • INCOLOY® 800H / 800HT®
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • MONEL® ALLOY 400

ALLOY 20

  • NICKEL 200/201
  • MONEL® R-405
  • MONEL® K-500
  • MONEL® ALLOY 400
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • INCOLOY® 825
  • HASTELLOY® X
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 800H / 800HT®
  • HASTELLOY® B-3

Duplex Stainless Steel

  • ZERON® 100, SUPER DUPLEX STAINLESS STEEL
  • Super Duplex S32760
  • LDX 2101®, DUPLEX STEEL
  • Duplex S31803
  • SUPER DUPLEX 2507
  • DUPLEX 2205

Stainless Steel

  • STAINLESS STEEL NITRONIC 50HS
  • STAINLESS STEEL NITRONIC 60
  • STAINLESS STEEL NITRONIC 50
  • STAINLESS STEEL 13-8PH
  • STAINLESS STEEL 15-5PH
  • STAINLESS STEEL PRODEC 303
  • STAINLESS STEEL 303
  • STAINLESS STEEL 446
  • STAINLESS STEEL 410S
  • STAINLESS STEEL 410
  • STAINLESS STEEL 304-304H
  • STAINLESS STEEL 17-4
  • STAINLESS STEEL 347
  • STAINLESS STEEL 440C
  • STAINLESS STEEL 309
  • STAINLESS STEEL 316-316l
  • STAINLESS STEEL AL-6XN®
  • STAINLESS STEEL 330
  • STAINLESS STEEL 321
  • 317L STAINLESS STEEL
  • STAINLESS STEEL 310/310S
  • Stainless Steel 304L
  • Stainless Steel 304
  • STAINLESS STEEL 253 MA

Carbon Steel

  • CARBON STEEL PRODUCTS

Titanium

  • 10V-2Fe-3Al
  • 6Al-4V
  • 6Al-4V STA
  • 6Al-4V ELI
  • 6Al-2Sn-4Zr-2Mo

上壹個
下壹個
Inquery now

訂閱我們的新聞

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe

QQ
Email me
Mail to us